testing machine

Specifications: It is suitable for all kinds of tension testing. Tension Tester Specifications

It is suitable for all kinds of tension testing.

Structure Principles    It is suitable for all kinds of tension testing, for the parts which are stick-shaped, soft-shaped or special shaped and needed to be tested. The loading process is uniform and stable. The loading speed can also be set different as different work piece. The record is accurate, and can be save and printed.

The biggest test Rally 500KN The biggest test trip 300mm The greatest work of the length 6000mm Rated pressure 20MPa Packing time 0.9999s The largest digital display 500KN SCM minimal degree of value 0.1  Technical Parameters Trust 5T Tension 2T Working Pressure 25MPa Stroke 300mm Power 1.5KW Way of Controlling By NC     Structure Principles 1 Frame type, the inner hole and four pillars holes are working together. The seal of the cylinder can endure the high press and have wear resistance, to make sure the deformation will not happen. The cone sleeve is oxidative with cold mould. The mould is heat treated in vacuum. 2 The system adopts two hydraulic was to achieve fast giving. To provide the high quality, the hydraulic valve is imported from Taiwan. To low down the noise we install the vane pump.3 The operating system comes from Omron, Japan and the human interface comes from Eview, Taiwan.4 The acoustic emission passed the USA Inspection System, so the accuracy is high and the curve is shown clearly.

testing machine